ACM Composite Column Covers can be radiused, square or oval in shape with caulked, reveal or butt joints. They can have incorporated top, bottom and intermediate reveals. They can be furnished with sound deading material applied to reduce noise on impact. These column covers are fabricated on press breaks and roll-forming equipment as shapes require. In most cases the panels have ½" minimum joints sealed with backer rod and sealant; however, reveal and butt jointing are also available. They are an ideal solution for interior and exterior column enclosure.

Attachment
Column covers are typically attached to a sub-framing system consisting of structural steel studs and clip angles attached to the building structure. They can also be attached directly to structural steel columns and concrete columns if room for sub-framing is not available. All column covers are engineered to withstand the required design loads.

Face and Liner Materials ACM-100 Panel Systems

• .020 Aluminum Skins, Kynar 500 finish
  (Anodized, Stainless Steel, Copper, & Zinc are available through varying sources in limited sizes)

Cores

• Polyethelene (PE) standard core material 3mm, 4mm, & 6mm
• Fire-Rated (FR) 4mm & 6mm

Panel Size limitations

• Maximum column cover lengths Approx. 15'-0"
• Column covers are available in an 8" minimum diameter
• Maximum column cover width Approx. 60" (arc length) based on 1" panel thickness (varies with panel thickness)